I'm using https://www.mouser.de/ProductDetail/See ... gIW4vD_BwE for PCB assembly/inspection.
I'm still using that one with a 'custom CS mountable' V1 camera (which has the lens removed) or an HQ camera.
That's more than enough detail/FOV/working distance under the lens than needed when working on PCBs.and an 'in use' picture (diameter of '1 Pfennig' was/is 16.5mm, screen size is 5.7in, resolution 640x480pixels, distance to probe roughly 150mm; note: the lens is set to 0.7 (lowest magnification))
![Image]()
I'm still using that one with a 'custom CS mountable' V1 camera (which has the lens removed) or an HQ camera.
That's more than enough detail/FOV/working distance under the lens than needed when working on PCBs.
Statistics: Posted by aBUGSworstnightmare — Fri May 24, 2024 6:44 am