SDK • Re: How can I adjust I2S pulse width?

If you are using the same example code, it should work normally.
It is important to note that the PCM5102 module has some important jumpers, which may be interfering with the sound.

The PCM5102 module only uses the I2S interface. It does not use the I2C interface!

Check the jumpers on the PCM5102 module:
https://github.com/Gustavomurta/miniDex ... 02%20B.JPG
https://github.com/Gustavomurta/miniDex ... re/PCM5102

Synthesizer with this module, but using a Raspberry PI - very interesting and it works!
https://github.com/probonopd/MiniDexed

Statistics: Posted by Gustavo_Murta — Sat Jan 11, 2025 12:31 am

---