Hi im new but have been watching youtube vids on the subject for a few months now so I do have a bit of a grasp in what to do.
using Rpi imager 1.8.3
pi os 64bit for rpi5 8gb with no connected monitor or keyboard or mouse
sd card 16gb
ive flashed the image to sd
connected the pi5 hard wired (ethernet port) to the same (dumb)switch as my windows 10 pc i7 6700 16bg ram
the pi boots up and i cannot remote into it using chrome.
it comes up site can not be reached IP address refused to connect so I cant even get into the log in page.
ive checked the ip address and can ping it on the network with not failed pkts
ive tried using putty to SSH into it but failed there also. the username & password comes up and I can put in user name and password but replies as access denied.
Ive erased the sd card 3 times and reflashed the image with the same result.
ive also tried setting up the wireless access facility and tried to get in using wifi instead of ethernet and same result.
the 4th time I reflashed the sd card I decided to try another tactic
for the username and password i kept it as plain text with no numbers, caps, or special char and I am able to SSH into it and get the terminal response.
I did a sudo update
I also did a full-update
but still cant get into desktop.
Im wanting to install octo print and have since found out octopi is not available on the pi5 yet. so apparently i have to do the octoprint deploy.
in the ssh connection i was able to type in the deploy command but it comes up and says I need a username and password for the github.
so now im lost as to where to go to from here.
I cant install octoprint
and I cant get into pi desktop.
using Rpi imager 1.8.3
pi os 64bit for rpi5 8gb with no connected monitor or keyboard or mouse
sd card 16gb
ive flashed the image to sd
connected the pi5 hard wired (ethernet port) to the same (dumb)switch as my windows 10 pc i7 6700 16bg ram
the pi boots up and i cannot remote into it using chrome.
it comes up site can not be reached IP address refused to connect so I cant even get into the log in page.
ive checked the ip address and can ping it on the network with not failed pkts
ive tried using putty to SSH into it but failed there also. the username & password comes up and I can put in user name and password but replies as access denied.
Ive erased the sd card 3 times and reflashed the image with the same result.
ive also tried setting up the wireless access facility and tried to get in using wifi instead of ethernet and same result.
the 4th time I reflashed the sd card I decided to try another tactic
for the username and password i kept it as plain text with no numbers, caps, or special char and I am able to SSH into it and get the terminal response.
I did a sudo update
I also did a full-update
but still cant get into desktop.
Im wanting to install octo print and have since found out octopi is not available on the pi5 yet. so apparently i have to do the octoprint deploy.
in the ssh connection i was able to type in the deploy command but it comes up and says I need a username and password for the github.
so now im lost as to where to go to from here.
I cant install octoprint
and I cant get into pi desktop.
Statistics: Posted by Damilko — Sat Mar 16, 2024 1:27 am