Hello, same issue on RPi 5 + Recalbox for many USB (only usb) controllers detected as xbox360 controlers.
* The device must be plugged and unplugged many times before it's detected.
* The issue is here since the first versions we tested on RPi5
* It works flawlessly on RPi4 with the same devices, same kernel, same config
* Same issue on Linux 6.1 (from october), 6.1 latest commit (april) and Linux 6.6 latest commit.
* Same issue with the bootloader from first rpi5 I received, and with latest bootloader at date.
When the controller is not detected, the Retroflag Snes USB issue is:With a 8Bitdo SNES30PRO USB:
* The device must be plugged and unplugged many times before it's detected.
* The issue is here since the first versions we tested on RPi5
* It works flawlessly on RPi4 with the same devices, same kernel, same config
* Same issue on Linux 6.1 (from october), 6.1 latest commit (april) and Linux 6.6 latest commit.
* Same issue with the bootloader from first rpi5 I received, and with latest bootloader at date.
When the controller is not detected, the Retroflag Snes USB issue is:
Code:
[ 143.732188] usb 3-1: new full-speed USB device number 10 using xhci-hcd[ 143.886058] usb 3-1: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.14[ 143.886066] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 149.227706] usb 3-1: can't set config #1, error -110Code:
[ 558.543548] usb 1-2: new full-speed USB device number 5 using xhci-hcd[ 558.698568] usb 1-2: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.14[ 558.698573] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 563.954613] usb 1-2: can't set config #1, error -110Statistics: Posted by DigitalLumberjack — Mon Apr 08, 2024 8:20 am