Keep an eye on to which connector you're connecting it to as you will have to add the override parameter when using dsi0 (because the screen will not be auto-detected).Remove all the stuff that the Waveshare script added. They don't keep it up to date and never released source for it. Have you done anything else to this OS install? If it is new then write a fresh image to ensure that there aren't any lingering changes made by Waveshare.
Try adding "dtoverlay=vc4-kms-dsi-waveshare-panel,10_1_inch" to the end of /boot/firmware/config.txt. You must have the "dtoverlay=vc4-kms-v3d" line above and it can't be commented out.
Statistics: Posted by aBUGSworstnightmare — Sat Jan 27, 2024 5:07 pm