Camera board • Re: Camera flickering at low light
Auto_exposure = 0 will be auto, try 1,2 or 3It did not accept 2 or 3 setting, only 0 or 1, but still same flicker.Statistics: Posted by koku — Sun Dec 08, 2024 6:07 pm
View ArticleTroubleshooting • Re: Pi Model B correct way to first time boot after Imager?
@rpdom Thanks for that info, I have bookmarked it for if I ever feel that brave.Right now I'm feeling like I've almost reached grey cell capacity. I now have a bullseye lite version running on my Pi....
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: Waveshare 4inch SPI Display on RPi5
I got the arduino code from http://www.lcdwiki.com/3.5inch_SPI_Modu ... %3AMSP3520which is an ili9488 LCD, with 480x320 resolutionI will re-read the arduino code, but also see if I can maintain some...
View ArticleRaspberry Pi OS • Re: Raspberryi card shows message
Where did you buy the RaspberryPi card with the OS pre-installed?In Turkey Raspberry Pi distribitor online. No it was emty. I install it.Statistics: Posted by haaldemir — Sun Dec 08, 2024 6:15 pm
View ArticlePython • Re: KeyboardInterrupt return error with serialposix.py
Awesome, thank you for your help! It is working!Statistics: Posted by SierraAlpha — Sun Dec 08, 2024 6:20 pm
View ArticleAdvanced users • Re: RPi4 IPv6 netboot (boot, pxe, dhcp6)
curious about any progress. no pressure. Thanks.Statistics: Posted by vintozver — Sun Dec 08, 2024 6:25 pm
View ArticleGeneral • Re: PT52-Lua The Modern Retro computer
Good to see the errors aren't coming from my code.Unsure what to think about the warningCode: /usr/src/arm-gnu-toolchain/bin/../lib/gcc/arm-none-eabi/13.2.1/../../../../arm-none-eabi/bin/ld:...
View ArticleGeneral discussion • Re: STICKY: PINN - An enhanced version of NOOBS.
PINN used Tvservice to help determine which displays are fitted.Unfortunately, it is not compatible with the Pi5 and the vc4-kms-v3d driver. Perhaps you are using that driver on the Pi4 on one of your...
View ArticlePython • Re: How does a u-shaping coder work
Is there an add-on board that I can buy to add more GPIO for example I have a add-on board that controls about six or eight servos. All the servos are for pin wires I have figured out the pin outs of...
View ArticleBeginners • Connecting a Pi Pico directly to the internet with SIM modules
I am interested in connecting a Raspberry Pi Pico to the internet with a SIM module. Could you please recommend a module and the corresponding drivers for this? Could you give me an example in...
View ArticleClik here to view.
SDK • Re: VS Code Pico Extension: Switching to RISC-V Architecture
I'm not sure why that wouldn't be working, compiling that project with the extension using your CMakeLists.txt works fine for me. Could you double check the ~/.pico-sdk/cmake/pico-vscode.cmake file...
View ArticleClik here to view.
General discussion • Re: New Raspberry Pi Products
Are the battery solder tabs connected up so we can solder one to them and it work?The...what? With this and the NVMe markings it feels like a laptop version was at least planned as an idea if not in...
View ArticleBeginners • Re: CM4-NAS-Double-Deck built in 2" LCD display
Well .. Might even be as or more expensive than a WD home cloud.Statistics: Posted by aBUGSworstnightmare — Mon Dec 09, 2024 6:40 pm
View ArticleTroubleshooting • Re: AI HAT 26 TOPS not working on Pi 5
Hi Mate,thanks for replying.I actually never tried to turn the FPC inwards. Nethertheless ... same result.It's the same message I also checked the cable multiple times to make sure it sits tight. if I...
View ArticleRaspberry Pi OS • Re: Virtual Keyboard Size
Rotate to portrait. Would be interested in knowing how big it get's (as there might be a correlation to the horizontal resolution). Could not realy test the keyboard as it is not predictable on which...
View ArticleCompute Module • Re: [Answered] CM 5 Revision Code ?
The 0x19 is the Pi 500 so that just leaves 0x16 to speculate on.Statistics: Posted by hippy — Mon Dec 09, 2024 6:58 pm
View ArticleAdvanced users • Re: Image File Utilities
I would need more information in order to make any further suggestions.Happy to provide any information you require. The image was created using Pi Imager to a USB drive, booted and basic Raspi-config...
View ArticleGeneral • Re: Connecting and hot-swapping multiple Picos with Raspberry Pi
USB would be the safest to hot-swap. I don't think SPI or I2C can be safely hot-swappedStatistics: Posted by scruss — Mon Dec 09, 2024 7:07 pm
View ArticleClik here to view.
SDK • Re: prevent "Downloading Picotool"
Sorry breaker to break the threadInstalling built binaries to your system is pretty common. I have many locally compiled programs in /usr/local/bin such as the custom OpenOCD required for RP2350, and...
View ArticleClik here to view.
General • Re: Raspberry Pi Pico 2 W / WH / H Thread
Then you can solder them Statistics: Posted by gmx — Tue Dec 10, 2024 7:10 pm
View Article