Clik here to view.
General discussion • Re: Metallic enclosures and wifi/bluetooth degradation
Hi Jason, your case looks like it pretty much covers the pi, interesting that you find the bluetooth was affected by it.I too don't want fan noise; on my pi 5 I am using a more "skimpy" metal heatsink...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: Regarding changes in Ethernet LED...
Thank you for your reply. The green LED behavior changed as a result of the setting values as you answered.I didn't know that Ethernet_nLED2 glows slower at 1000Mbit communication speed, is this...
View ArticleAutomation, sensing and robotics • Re: Working rain sensor anywhere?
That generic tipping bucket as used in the Pi Project weather station and in their older setup, is also the one Pimoroni use with their Pi Zero/etc and RP2040 based setup.(OK that also has wind...
View ArticleTroubleshooting • Re: High Load
TP-LinkUse their support (email, not forum).When I had problems their UK tech support really new stuff.Yes I use the Powerlites too and they helped with that, for me it was the WiFi extender (PL...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Compute Module 4 Carrier Board Compliance...
Thank you for your interest. Please forgive my poor writing as I am using translation software to make this post.I am currently developing a carrier board for the CM4 and would like to do compliance...
View ArticleRaspberry Pi Connect • Re: firewall?
Connect essentially operates in two major phases of communication, a negotiation phase and a connected phase.Connect will use port 443 for the negotiation phase.For the connected phase, Connect will...
View ArticleClik here to view.
Raspberry Pi Connect • Re: Copy and paste instructions
I am using Firefox 126.0.1 64 bit - I did read the article posted but I am having no issues with copy and paste in Firefox for other appsThanks for the detail.So, I've just tried this on Firefox 127.0...
View ArticleRaspberry Pi Connect • Re: connect to a Pi which use LTE-modem connection
I would expect Raspberry Pi Connect to operate in such a set-up, but be aware that the intermittent latency issues with LTE connections may present an experience hazard.I'd love to hear how you get...
View ArticleRaspberry Pi Connect • Re: VPN
Glad to hear you've found success with Connect, can3gxw. Let us know if you find any additional problems - equally, I'd love to hear how it performs over commercial VPNs like the one you've...
View ArticleBeginners • Re: I need a steepping motor hat
Hello. I need a stepping motor hat for two stepping motor and one servo motor. I need advice.A quick search on the website for one of the Approved Reseller in the UK found these...
View ArticleAutomation, sensing and robotics • Gravity: Offline voice recognition module
Hello,I just purchased the Gravity Offline voice recognition module and want to use it with a Raspberry pi 4 to control motors and servos.Has anyone used it with this pi and if so do you have any...
View ArticleTroubleshooting • Re: Apache not accessible to internet. Losing my mind.
Here is the run down. I was behind a CGNAT that is no longer an issue.Hi , What exactly does that mean? because , when you are in CGNAT , you can ' t acces a local IP adress trow the internet .i'm in...
View ArticleGeneral • Re: Help with Pico ADC project
What I would like to achieve is to trigger a output on the PICO when a specific resistance is met, as shown in the image below.It looks like it should be easy to achieve in C, MicroPython, or anything...
View ArticleRaspberry Pi OS • Re: Trying to build yesterdays 6.6.33 kernel but it has no...
I think my fundamental understanding of how the code in this repo is being managed differs from the reality. That is to say, the version 6.6.33 is being merged into the rpi-6.6.7 repo from the...
View ArticleGeneral • Re: Epoxy
What about just doing an epoxy treatment to your board? Could you then still download firmware update over wi-fi? Would it degrade the antena performance?I have no experience of it but would think it...
View ArticleClik here to view.
Automation, sensing and robotics • Re: Automatic shutdown and restart after...
I think you missed one scenario: Pi shuts down but mains resumes before the UPS goes into standby and cuts power to the Pi.As the Pi never loses power, it won't automatically restart. You need...
View ArticleDevice Tree • Re: How to make gpio-shutdown not pull up power menu
I've been attempting and failing to make this work. The systemd controls that I expected to work, don't. In the end I gave up and asked the author/maintainer of the desktop environment, and the best...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: Can ADV7282M work with RPi4 at all ?
Hi,I have applied these commands as adviced. The result is as below :1. ____ get-detected___ gives 0x000000ff PAL_B/B1.... etc2. ------- set-standard PAL gives "standard set to 000000ff"3. the final...
View ArticleTroubleshooting • Re: Headless RPi 3B+ extremely slow !
Odd, what network is it all connected to e.g. Ethernet cables to a 4 port home router or via something else?Statistics: Posted by neilgl — Fri Jun 14, 2024 10:36 am
View ArticleTroubleshooting • Re: Raspberry PI 4 - rebooting and unreachable
The SD cards can go bad after extended use.You might be able to read the other one by putting it into a USB microSD card reader and plugging that into the Pi. Might have some files on it you want to...
View Article